NP - Polyurethane Band (Injected) Color Garnet, Nylon Nucleus White

Wheel with white nylon core, polyurethane band (injected) garnet color and diameters 63 to 250 mm
Tracción Manual
Silenciosas
Protección del suelo
No manchan el suelo
Polyamide core injected on a polyurethane band.
They are modern wheels that (for their price and features) are between the polyamide wheels and the wheels with a polyurethane band.
Semi-resounding tread (96 ± 2 ° Shore A).

Propiedades de la rueda

Diámetro
Diámetro
63 a 250 mm
Carga máxima
Carga máxima
60 a 750 Kg
Dureza de la Banda
Dureza de la Banda
96 ±2º SHORE A
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
3/5
Ruido
Ruido
3/5
Temperatura de trabajo
Temperatura de trabajo
5 a 40 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Diámetro Diámetro 63 a 250 mm
Carga máxima Carga máxima 60 a 750 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 22 a 50 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 27 a 58 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 8,2 a 20,3 mm
Tipo de eje Tipo de eje Eje Liso, Eje Rodillos, Eje Rodillos Inox, Eje Bolas
Banda de rodadura Banda de rodadura Banda de Poliuretano
Color banda de rodadura Color banda de rodadura Granate
Special:
Polyamide core injected on a band of poliuretano.Son Modern wheels that (for their price and features) are between the polyamide wheels and the wheels with band of poliuretano.Banda Demoner rolling (96 ± 2 ° Shore A).
Applications:
In cases that a more elastic and silent operation than offered by the Nylon wheels is required.
Properties:
They bring together the nylon qualities in the core and improve them in the tread bands.
They have a good look and finish, they are light weight, silent and soft, clean, are not oxidized and required a minimum entertainment.
The polyurethane (urethane rubber) is a material with an exceptional resistance to wear, good resistance to deformation, is more elastic than the nylon, makes less noise and offers greater protection of soils.
Resists atmospheric agents, hydrocarbons, fats, oils, milk, etc.
Precautions:
The "injected" polyurethane is of characteristics lower than the "vulcanized" polyurethane.
They resist contact with acids, solvents and alcohol.Soportan Temperatures of -30 ° C to + 80 ° C (the category 5 wheels can reach 120 ° C during short periods), its best field of use is between + 5 ° C to + 40 ° C.
Finishing:
NPB4 series: 1 bearing protected by tapas in poliamida.Serie NPB5: 2 bearings.
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Logistics and transport # logistics #transporte # Aeronautics # Army
Construction and mining # Construction # Mining #ALQUILER
Health and Laboratories #Hospitage #Pho Pharmaceutical
Food and Hospitality # Food # Hospitality #inox
Retail and Commerce #retail #Supermarket #Equipment Commercial # Domestic
Leisure and shows #Ocio # shows #deportes #eventos
Agriculture and gardening #griculture # Gardening #Outdoor
Nautical # nautical #stilleros # maritime
Código Referencia Diámetro Ancho banda de rodadura Ancho del cubo del núcleo Diámetro del cubo del núcleo Tipo de eje Carga máxima Peso
16-11 063 NPL3 63 22 27 10.2 Smooth axis 60 0.50
16-13 080 NPL3 80 22 27 10.3 Smooth axis 80 0.85
16-15 080 NPL4 80 30 40 12.2 Smooth axis 120 0,10
16-16 080 NPR4 80 30 40 12.0 Roller shaft 120 0,12
16-16/4 080 NPX4 80 30 40 12.0 Stainless roller shaft 120 0,12
16-16/6 080 NPB4 80 30 45 8.2 Ball shaft 120 0,12
16-17/2 080 NPL5 80 34 39 12.2 Smooth axis 260 0.14
16-17/6 080 NPB5 80 34 40 12.0 Ball shaft 260 0.18
16-18 100 NPL3 100 27 32 12.2 Smooth axis 90 0.13
16-19 100 NPL4 100 30 45 12.2 Smooth axis 170 0.15
16-19/2 100 NPR4 100 30 45 12.0 Roller shaft 170 0.17
16-19/24 100 NPX4 100 30 45 12.0 Stainless roller shaft 170 0.16
16-19/4 100 NPB4 100 30 45 8.2 Ball shaft 170 0,20
16-20 100 NPL5 100 40 45 15.2 Smooth axis 300 0.24
16-21/02 100 NPB5 100 40 45 15.0 Ball shaft 300 0.21
16-21/2 125 NPL3 125 27 32 12.2 Smooth axis 100 0.27
16-21/4 125 NPL4 125 35 45 15.2 Smooth axis 230 0.25
16-21/6 125 NPR4 125 35 45 15.0 Roller shaft 230 0.27
16-21/64 125 NPX4 125 35 45 15.0 Stainless roller shaft 230 0.27
16-21/7 125 NPB4 125 35 45 8.2 Ball shaft 230 0,20
16-21/96 125 NPL5 125 40 44 15.0 Smooth axis 400 0.42
16-22 125 NPL6 125 45 58 20.2 Smooth axis 500 0.45
16-23/1 125 NPX5 125 45 58 20.2 Stainless roller shaft 500 0.50
16-23/2 125 NPB5 125 45 58 20.0 Ball shaft 500 0.38
16-24 150 NPL5 150 45 58 20.3 Smooth axis 600 0.58
16-25/2 150 NPX5 150 45 58 20.0 Stainless roller shaft 600 0.70
16-25/5 150 NPB5 150 45 58 20.0 Ball shaft 600 0.51
16-26 200 NPL4 200 50 58 20.3 Smooth axis 450 0.80
16-26/2 200 NPR4 200 50 58 20.0 Roller shaft 450 0.85
16-26/6 200 NPL5 200 50 58 20.3 Smooth axis 700 0,89
16-27/2 200 NPX5 200 50 58 20.0 Stainless roller shaft 700 0.95
16-28 200 NPB5 200 50 50 20.0 Ball shaft 750 0.90
16-29 250 NPB6 250 50 58 20.0 Ball shaft 750 1.60

Values expressed in mm.