MITG4 NP-FD - Rotating stainless steel brake, screw clamp, nylon wheel - Polyurethane

Wheel with rotating stainless support with double brake with NP wheel (nylon core and polyurethane band) and screw clamp
Tracción Manual
Silenciosas
Protección del suelo
No manchan el suelo
Inoxidable
Steel supports (stamping). Bright.

Rotating model AAG-FDFastening of the supports by through screw M12.ado bright.

Rotating model AAG-FDFork provided with screw and self-locking nut (8.8): DIN-933 M8X60 in Ø80 to 125mm., M-12x80 in Ø150 to 200mm. and M-14x120 in Ø260 mm.ado bright.

Rotating model AAG-FDCap: Ø12x8.2x46 in Ø80 to 125mm., Ø20x12,2x61 at Ø150 to 200 mm. and Ø20x14,2x96 in 260 mm.ado bright.

Rotating model AAG-FDFinishes: Bright zinc.

Mitg-FD model brackets
Simultaneous Blocker of Wheel and Stand Turn:
Available in all rotating rotary: Add FD to the reference or the corresponding rotary numeric code.

Propiedades de la rueda

Diámetro
Diámetro
80 a 125 mm
Carga máxima
Carga máxima
120 a 200 Kg
Dureza de la Banda
Dureza de la Banda
96 ±2º SHORE A
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
3/5
Ruido
Ruido
3/5
Temperatura de trabajo
Temperatura de trabajo
-30 a 80 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Diámetro Cabeza Diámetro Cabeza 72 mm
Tornillo Sujeción Tornillo Sujeción M12
Espesor Horquilla Espesor Horquilla 2,5 mm
Eje Rueda Eje Rueda M8
Diámetro Diámetro 80 a 125 mm
Carga máxima soporte Carga máxima soporte 120 a 200 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 30 a 35 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 40 a 45 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 12 a 15,2 mm
Tipo de eje Tipo de eje Eje Liso, Eje Rodillos Inox
Banda de rodadura Banda de rodadura Banda de Poliuretano
Color banda de rodadura Color banda de rodadura Granate
MITG4-NP-FD
Special:
Polyamide core injected on a band of poliuretano.Son Modern wheels that (for their price and features) are between the polyamide wheels and the wheels with band of poliuretano.Banda Demoner rolling (96 ± 2 ° Shore A).
Applications:
In cases that a more elastic and silent operation than offered by the Nylon wheels is required.
Properties:
They bring together the nylon qualities in the core and improve them in the tread bands.
They have a good look and finish, they are light weight, silent and soft, clean, are not oxidized and required a minimum entertainment.
The polyurethane (urethane rubber) is a material with an exceptional resistance to wear, good resistance to deformation, is more elastic than the nylon, makes less noise and offers greater protection of soils.
Resists atmospheric agents, hydrocarbons, fats, oils, milk, etc.
Precautions:
The "injected" polyurethane is of characteristics lower than the "vulcanized" polyurethane.
They resist contact with acids, solvents and alcohol.Soportan Temperatures of -30 ° C to + 80 ° C (the category 5 wheels can reach 120 ° C during short periods), its best field of use is between + 5 ° C to + 40 ° C.
Finishing:
NPB4 series: 1 bearing protected by tapas in poliamida.Serie NPB5: 2 bearings.
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Logistics and transport # logistics #transporte # Aeronautics # Army
Construction and mining # Construction # Mining #ALQUILER
Health and Laboratories #Hospitage #Pho Pharmaceutical
Food and Hospitality # Food # Hospitality #inox
Retail and Commerce #retail #Supermarket #Equipment Commercial # Domestic
Leisure and shows #Ocio # shows #deportes #eventos
Agriculture and gardening #griculture # Gardening #Outdoor
Nautical # nautical #stilleros # maritime
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
34-100/16-FD MITG4 080 NPL4-FD 80 30 82 108 Smooth axis 120 0.83
34-100/18-FD MITG4 080 NPX4-FD 80 30 82 108 Stainless roller shaft 120 0.64
34-100/34-FD MITG4 100 NPL4-FD 100 30 89 128 Smooth axis 150 0.67
34-100/36-FD MITG4 100 NPX4-FD 100 30 89 128 Stainless roller shaft 150 0.68
34-100/56-FD MITG4 125 NPL4-FD 125 35 101,5 155 Smooth axis 200 0.81
34-100/58-FD MITG4 125 NPX4-FD 125 35 101,5 155 Stainless roller shaft 200 0.83

Various line test<br>Second line of text *