MTG4 NP-FD - Rotary brake stand, screw clamp, nylon wheel - Polyurethane

Wheel with rotary support with double brake with NP wheel (nylon core and polyurethane band) and screw clamp
Tracción Manual
Silenciosas
Protección del suelo
No manchan el suelo
Stamped steel supports.
Fastening of the brackets by M12 through screw.
Fork provided with screw and self-locking nut (8.8): DIN-933 M8X60 in Ø80 to 125mm., M-12x80 in Ø150 to 200mm. and M-14x120 in Ø260 mm.
Cap: Ø12x8.2x46 in Ø80 to 125mm., Ø20x12,2x61 at Ø150 to 200 mm. and Ø20x14,2x96 in 260 mm.
Finishes: Bright zinc.

MODRO MODE MATRAMS MTG-FD
Simultaneous Blocker of Wheel and Stand Turn:
Available in all rotating rotary.

Propiedades de la rueda

Diámetro
Diámetro
80 a 200 mm
Carga máxima
Carga máxima
120 a 300 Kg
Dureza de la Banda
Dureza de la Banda
96 ±2º SHORE A, 96 ±2° SHORE A
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
3/5
Ruido
Ruido
3/5
Temperatura de trabajo
Temperatura de trabajo
-20 a 60 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Diámetro Cabeza Diámetro Cabeza 72 a 98 mm
Tornillo Sujeción Tornillo Sujeción M12
Espesor Horquilla Espesor Horquilla 2,5 a 3 mm
Eje Rueda Eje Rueda M8, M10
Diámetro Diámetro 80 a 200 mm
Carga máxima soporte Carga máxima soporte 120 a 300 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 30 a 50 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 40 a 58 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 8,2 a 20,3 mm
Tipo de eje Tipo de eje Eje Liso, Eje Rodillos, Eje Bolas
Banda de rodadura Banda de rodadura Banda de Poliuretano
Color banda de rodadura Color banda de rodadura Granate
MTG4-NP-FD
Special:
Polyamide core injected on a band of poliuretano.Son Modern wheels that (for their price and features) are between the polyamide wheels and the wheels with band of poliuretano.Banda Demoner rolling (96 ± 2 ° Shore A).
Applications:
In cases that a more elastic and silent operation than offered by the Nylon wheels is required.
Properties:
They bring together the nylon qualities in the core and improve them in the tread bands.
They have a good look and finish, they are light weight, silent and soft, clean, are not oxidized and required a minimum entertainment.
The polyurethane (urethane rubber) is a material with an exceptional resistance to wear, good resistance to deformation, is more elastic than the nylon, makes less noise and offers greater protection of soils.
Resists atmospheric agents, hydrocarbons, fats, oils, milk, etc.
Precautions:
The "injected" polyurethane is of characteristics lower than the "vulcanized" polyurethane.
They resist contact with acids, solvents and alcohol.Soportan Temperatures of -30 ° C to + 80 ° C (the category 5 wheels can reach 120 ° C during short periods), its best field of use is between + 5 ° C to + 40 ° C.
Finishing:
NPB4 series: 1 bearing protected by tapas in poliamida.Serie NPB5: 2 bearings.
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Logistics and transport # logistics #transporte # Aeronautics # Army
Construction and mining # Construction # Mining #ALQUILER
Health and Laboratories #Hospitage #Pho Pharmaceutical
Food and Hospitality # Food # Hospitality #inox
Retail and Commerce #retail #Supermarket #Equipment Commercial # Domestic
Leisure and shows #Ocio # shows #deportes #eventos
Agriculture and gardening #griculture # Gardening #Outdoor
Nautical # nautical #stilleros # maritime
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
34-080/32-FD MTG4 080 NPL4-FD 80 30 81 108 Smooth axis 120 0.62
34-080/34-FD MTG4 080 NPR4-FD 80 30 81 108 Roller shaft 120 0.64
34-080/36-FD MTG4 080 NPB4-FD 80 30 — — Ball shaft 120 0.51
34-082/52-FD MTG4 100 NPL4-FD 100 30 92 128 Smooth axis 170 0.71
34-082/61-FD MTG4 100 NPB4-FD 100 30 — — Ball shaft 170 1,10
34-082/6-FD MTG4 100 NPR4-FD 100 30 92 128 Roller shaft 170 0.73
34-084/62-FD MTG4 125 NPL4-FD 125 35 102 128 Smooth axis 200 0.83
34-084/7-FD MTG4 125 NPR4-FD 125 35 102 155 Roller shaft 200 0.85
34-086/30-FD MTG4 150 NPL5-FD 150 45 130 195 Smooth axis 300 1.86
34-086/36-FD MTG4 150 NPB5-FD 150 45 130 195 Ball shaft 300 1.79
34-088/32-FD MTG4 200 NPL4-FD 200 50 155 240 Smooth axis 300 2.80
34-088/4-FD MTG4 200 NPR4-FD 200 50 155 240 Roller shaft 300 2.85

Values expressed in mm.