HK - Vulkotech® Band Color Ocre, Gray Cast Iron Core

Wheel with gray cast iron core, Vulkotech® band ocher color and diameters 150 to 300 mm
Tracción Manual
Tracción Mecánica
Super Elásticas
Silenciosas
Protección del suelo
No manchan el suelo
Amortiguación
Vulcanized polyurethane (Vulkotech) band on a cast iron core.
Band hardness: 93 ± 3 ° Shore A.
Vulkotech® is a polyurethane specially developed with features very similar to Vulkollan®. It has excellent physical and mechanical properties, as well as great resistance to wear, heat and corrosion.
HKL - Bushing with smooth hole for special machines.
HKH - Bushing with keyway for uses as a traction wheel. According to DIN6885 regulations.
HKB - Bushing with precision ball bearing.

Propiedades de la rueda

Diámetro
Diámetro
150 a 300 mm
Carga máxima
Carga máxima
950 a 2.400 Kg
Dureza de la Banda
Dureza de la Banda
93 ±3° SHORE A
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
3/5
Ruido
Ruido
3/5
Temperatura de trabajo
Temperatura de trabajo
-40 a 85 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
SOPORTES QUE SE MONTAN:
QPG8-HK QPG8-HK-FD QPF8-HK UPG8-HK UPG8-HK-FS UPF8-HK
Diámetro Diámetro 150 a 300 mm
Carga máxima Carga máxima 950 a 2.400 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 50 a 75 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 60 a 90 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 20,0 a 40,0 mm
Tipo de eje Tipo de eje Eje Liso, Chavetero, Eje Bolas
Banda de rodadura Banda de rodadura Banda de Poliuretano
Color banda de rodadura Color banda de rodadura Ocre
Special:
Vulcanized polyurethane (Vulkotech) band on a cast iron core.
Band hardness: 93 ± 3 ° Shore A.
Vulkotech® is a polyurethane specially developed with features very similar to Vulkollan®. It has excellent physical and mechanical properties, as well as great resistance to wear, heat and corrosion. Bone with smooth hole for special machines.
Hub:
HKL - Bushing with smooth hole for special machines.
HKH - Bushing with keyway for uses as a traction wheel.
Regulatory DIN6885.HKB - Bushing with precision ball bearing.

HKB - Bushing with precision ball bearing.
Properties:
The polyurethane (urethane rubber) is a plastic material, which has almost the same elastic and electrical qualities as rubber, but is characterized by:
• Its high resistance to tearing and mellds (caused by sudden braking and irregular or very abrasive soils).
• Its exceptional resistance to abrasion (up to ten times longer than natural rubber, under similar conditions of use).
• Its high load capacity (twice greater than its rubber equivalent).
• Its low resistance to starting and rolling (less than 30% compared with rabbit similar bands).
Polyurethane wheels do not mess or spoil soils, they have good resistance and cushioning to crashes and vibrations, are silent and elastic. Resist at atmospheric agents, oils, fats, Gasolines, Hydrocarbons, Sugar, Propane, Butane, Oxygen, Ozone, etc.
Precautions:
The indicated loads have been calculated for a speed of 4 km / h.
Working temperature: -40ºC A + 85ºC.
Mechanical traction:
For mechanical traction, loads must be reduced in the following proportions:
- 10 km / h - 20%
- 16 km / h - 40% (maximum speed recommended for this type of wheels).
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Logistics and transport # logistics #transporte # Aeronautics # Army
Construction and mining # Construction # Mining #ALQUILER
Leisure and shows #Ocio # shows #deportes #eventos
Código Referencia Diámetro Ancho banda de rodadura Ancho del cubo del núcleo Diámetro del cubo del núcleo Tipo de eje Carga máxima Peso
16-820/20 150 HKL6 / 20 150 50 60 20.0 Smooth axis 950 2.27
16-820/25 150 HKL6 / 25 150 50 60 25.0 Smooth axis 950 1.80
16-820/30 150 HKL6 / 30 150 50 60 30.0 Smooth axis 950 1.80
16-823/20 200 HKL6 / 20 200 50 60 20.0 Smooth axis 1,200 3.00
16-823/25 200 HKL6 / 25 200 50 60 25.0 Smooth axis 1,200 3.00
16-823/30 200 HKL6 / 30 200 50 60 30.0 Smooth axis 1,200 3.00
16-826/30 200 HKL8 / 30 200 75 90 30.0 Smooth axis 1,650 3.70
16-826/35 200 HKL8 / 35 200 75 90 35.0 Smooth axis 1,650 3.70
16-826/40 200 HKL8 / 40 200 75 90 40.0 Smooth axis 1,650 3.70
16-830/30 250 HKL8 / 30 250 75 90 30.0 Smooth axis 1,900 6,80
16-830/35 250 HKL8 / 35 250 75 90 35.0 Smooth axis 1,900 6,80
16-830/40 250 HKL8 / 40 250 75 90 40.0 Smooth axis 1,900 6,80
16-832/30 300 HKL8 / 30 300 75 90 30.0 Smooth axis 2,400 5,00
16-832/35 300 HKL8 / 35 300 75 90 35.0 Smooth axis 2,400 8.80
16-832/40 300 HKL8 / 40 300 75 90 40.0 Smooth axis 2,400 8.80
16-840/20 150 HKH6 / 20 150 50 60 20.0 Chavetero 950 1.80
16-840/25 150 HKH6 / 25 150 50 60 20.0 Chavetero 950 1.80
16-840/30 150 HKH6 / 30 150 50 60 35.0 Chavetero 950 4.00
16-846/20 200 HKH6 / 20 200 50 60 20.0 Chavetero 1,200 3.00
16-846/25 200 HKH6 / 25 200 50 60 25.0 Chavetero 1,200 3.00
16-846/30 200 HKH6 / 30 200 50 60 30.0 Chavetero 1,200 3.00
16-849/30 200 HKH8 / 30 200 75 90 30.0 Chavetero 1,650 3.70
16-849/35 200 HKH8 / 35 200 75 90 35.0 Chavetero 1,650 3.70
16-849/40 200 HKH8 / 40 200 75 90 40.0 Chavetero 1,650 3.70
16-852/30 250 HKH8 / 30 250 75 90 30.0 Chavetero 1,900 6,80
16-852/35 250 HKH8 / 35 250 75 90 35.0 Chavetero 1,900 6,80
16-852/40 250 HKH8 / 40 250 75 90 40.0 Chavetero 1,900 6,80
16-855/30 300 HKH8 / 30 300 75 90 30.0 Chavetero 2,400 8.80
16-855/35 300 HKH8 / 35 300 75 90 35.0 Chavetero 2,400 8.80
16-855/40 300 HKH8 / 40 300 75 90 40.0 Chavetero 2,400 8.80
16-870/20 150 HKB6 / 20 150 50 60 20.0 Ball shaft 950 2.00
16-870/25 150 HKB6 / 25 150 50 60 25.0 Ball shaft 950 2.00
16-873/20 200 HKB6 / 20 200 50 60 20.0 Ball shaft 1,200 8.00
16-873/25 200 HKB6 / 25 200 50 60 25.0 Ball shaft 1,200 3,20
16-873/30 200 HKB6 / 30 200 50 60 30.0 Ball shaft 1,200 3,20
16-876/30 200 HKB8 / 30 200 75 90 30.0 Ball shaft 1,650 3.90
16-876/35 200 HKB8 / 35 200 75 90 35.0 Ball shaft 1,650 3.90
16-879/30 250 HKB8 / 30 250 75 90 30.0 Ball shaft 1,900 7.00
16-879/35 250 HKB8 / 35 250 75 90 35.0 Ball shaft 1,900 7.00
16-879/40 250 HKB8 / 40 **** 250 75 90 40.0 Ball shaft 1,900 7.00
16-882/30 300 HKB8 / 30 300 75 90 30.0 Ball shaft 2,400 6,20
16-882/35 300 HKB8 / 35 300 75 90 35.0 Ball shaft 2,400 6,20
16-882/40 300 HKB8 / 40 300 75 90 40.0 Ball shaft 2,400 6,20

Values expressed in mm.