KPG5 AP - Rotating support, Plate clamp, Aluminum wheel - Polyurethane

Wheel with rotary support with APB wheel (aluminum core and polyurethane band tap) and plate clamp
Tracción Manual
Silenciosas
Protección del suelo
No manchan el suelo
Stamped steel supports.
Fastening of the supports by 4-hole plate.
Fork provided with screw and self-locking nut (8.8): DIN-933 M-12X85MM.
Cap: Ø20x12,2x61mm.
Mounting pins for ball bearing.
Finishes: Bright zinc.

KPG model supports
Double row of chrome steel balls protected by envelopes and grease retention gasket. Robust central pivot of Ø20 mm steel. with clamping by threading and pung. Antigiro system.

Propiedades de la rueda

Diámetro
Diámetro
125 a 250 mm
Carga máxima
Carga máxima
450 a 800 Kg
Dureza de la Banda
Dureza de la Banda
93 ±2º SHORE A
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
3/5
Ruido
Ruido
3/5
Temperatura de trabajo
Temperatura de trabajo
-30 a 80 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Tamaño Pletina Tamaño Pletina 135x110 mm
Tornillo Sujeción Tornillo Sujeción M12
Distancia Agujeros Distancia Agujeros 105x80 mm
Espesor Horquilla Espesor Horquilla 4,0 mm
Eje Rueda Eje Rueda M12
Diámetro Diámetro 125 a 250 mm
Carga máxima soporte Carga máxima soporte 450 a 800 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 50 a 57 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 60 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 20 a 25 mm
Tipo de eje Tipo de eje Eje Bolas
Banda de rodadura Banda de rodadura Banda de Poliuretano
Color banda de rodadura Color banda de rodadura Ocre
KPG5-PA
Special:
Vulcanized polyurethane band on a core of aluminio.Banda Sleeping rolling (93 ± 2 ° Shore A).
Applications:
Particularly indicated for intense services, heavy loads and unfavorable pavement conditions (rugged, broken surfaces, with metal chips, crystals, gravel, oil stains, fats, etc.).
Properties:
The polyurethane (urethane rubber) is a plastic material, which has almost the same elastic and electrical qualities as rubber, but is characterized by:
• Its high resistance to tearing and mellds (caused by sudden braking and irregular or very abrasive soils).
• Your exceptional abrasion resistance.
• Your high load capacity.
• Your remarkable elasticity, good resistance to deformation and excellent recovery after its use for long periods under major static charges.
• Its low resistance to starting and rolling (less than 30% compared with similar rubber bands).
Do not get dirty or spoil the floors.
Good resistance and cushioning shocks and vibrations.
Resist atmospheric agents, oils, fats, gasoline, hydrocarbons, sugar, propane, butane, oxygen, ozone, etc.
Precautions:
The polyurethane is sensitive to hydrolysis (this includes: acids, hot water (+ 40 ° C), vapor and wet air reheated).
They work satisfactorily between -30 ° C A + 80 ° C, can reach up to 130 ° C during short periods. (For continued uses, temperatures above 60 ° C could facilitate the de-zone of the bands and greater than 100 ° C lead to the deterioration of the bands in a few days.).
The indicated loads have been calculated for a speed of 4 km / h.
For mechanical traction, loads must be reduced in the following proportions:
-10 km / h - 20%
-16 km / h - 40%
-20 km / h - 60% (maximum recommended speed)
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Logistics and transport # logistics #transporte # Aeronautics # Army
Construction and mining # Construction # Mining #ALQUILER
Leisure and shows #Ocio # shows #deportes #eventos
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
35-442 KPG5 125 APB5 125 50 117,5 164 Ball shaft 450 2.56
35-518 KPG5 160 APB5 160 50 135 199 Ball shaft 600 3,19
35-592 KPG5 200 APB5 200 50 155 239 Ball shaft 800 3,74
35-628 KPG5 250 APB5 250 57 180 292 Ball shaft 800 3,98

Values expressed in mm.