FPG4 HF - Rotating support, Plate clamp, Cast iron wheel

Wheel with rotating support with HF wheel (cast iron monoblock) and fastening to plate
Tracción Manual
Altas y bajas temperaturas
Para Riel
High strength rotary support with veneer plate of great thickness, stamped and galvanized, equipped with a rotating double crown group of balls, assembled and riveted at the top.

FPG model brackets
Double row of chrome steel balls protected by envelopes and grease retention gasket in the two rows.
Robust Pivot Central Rack of Steel.

Propiedades de la rueda

Diámetro
Diámetro
75 a 125 mm
Carga máxima
Carga máxima
190 a 300 Kg
Dureza de la Banda
Dureza de la Banda
180 a 220 HB
Protección del suelo
Protección del suelo
1/5
Resistencia Rodadura
Resistencia Rodadura
1/5
Ruido
Ruido
5/5
Temperatura de trabajo
Temperatura de trabajo
-90 a 600 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Tamaño Pletina Tamaño Pletina 100x84 mm
Tornillo Sujeción Tornillo Sujeción M8
Distancia Agujeros Distancia Agujeros 80x60 mm
Espesor Horquilla Espesor Horquilla 3,5 mm
Eje Rueda Eje Rueda M8
Diámetro Diámetro 75 a 125 mm
Carga máxima soporte Carga máxima soporte 190 a 300 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 34 a 38 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 45 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 12 a 20 mm
Tipo de eje Tipo de eje Eje Liso, Eje Bolas
Banda de rodadura Banda de rodadura Metálicas
Color banda de rodadura Color banda de rodadura Metálico
FPG4-HF
Special:
They are obtained by iron casting with laminar graphite.
According to DIN 1691 (190-205 HB). Machining tread tread.
Applications:
The foundry is a good choice in cases of very severe working conditions or where the existence of cutting objects, chemical products or excessive temperatures would quickly destroy other types of wheels.
Properties:
They combine strength, long duration and economy.
In conjunction with steel wheels, they have the highest load capacity and the lower rolling resistance, first considerations to take into account when required to move large loads with a minimum of effort.
They can normally be used with a smooth bearing rolling on hardened steel cap (requiring in this case frequent lubrication), but the use of roller bearings or ball bearings is recommended when it is about moving large loads or great ease of movement is required.
These wheels support high static loads for long periods without suffering any deformation.
Precautions:
The smelting wheels spoil the soils, they are noisy, they rose because they are metallic and require greater entertainment.
Temperatures between -90 ° C to + 600 ° C can resist. (Except those who carry ball bearing -40ºC to + 140ºC, for superior temperatures, special bearings, consult) should be used. For temperatures above 200 ° C, the load capacity between 30% to 50% should be reduced.
The cast iron presents a certain fragility (it can break if it receives a strong blow).
General industry #Industry #manufacturing # production #alquiler
Construction and mining # Construction # Mining #ALQUILER
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
34-710 FPG4 075 HFL4 75 34 80,5 108 Smooth axis 190 1.25
34-740 FPG4 100 HFL4 100 38 92 130 Smooth axis 250 2.01
34-742 FPG4 100 HFB4 100 38 92 130 Ball shaft 250 2.21
34-762 FPG4 125 HFB4 125 38 115,5 156 Ball shaft 300 2.66

Values expressed in mm.