HF - Gray-cast iron monoblock

Rolled iron monoblock Gray color and diameters 75 to 250 mm
Tracción Mecánica
Altas y bajas temperaturas
They are obtained by iron casting with laminar graphite. According to DIN 1691 (190-205 HB). Machine tread tread.

Propiedades de la rueda

Diámetro
Diámetro
75 a 250 mm
Carga máxima
Carga máxima
190 a 1.500 Kg
Dureza de la Banda
Dureza de la Banda
180 a 220 HB
Protección del suelo
Protección del suelo
1/5
Resistencia Rodadura
Resistencia Rodadura
1/5
Ruido
Ruido
5/5
Temperatura de trabajo
Temperatura de trabajo
-90 a 600 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Diámetro Diámetro 75 a 250 mm
Carga máxima Carga máxima 190 a 1.500 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 34 a 50 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 45 a 60 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 12,0 a 25,0 mm
Tipo de eje Tipo de eje Eje Liso, Eje Bolas
Banda de rodadura Banda de rodadura Metálicas
Color banda de rodadura Color banda de rodadura Metálico
Special:
They are obtained by iron casting with laminar graphite.
According to DIN 1691 (190-205 HB). Machining tread tread.
Applications:
The foundry is a good choice in cases of very severe working conditions or where the existence of cutting objects, chemical products or excessive temperatures would quickly destroy other types of wheels.
Properties:
They combine strength, long duration and economy.
In conjunction with steel wheels, they have the highest load capacity and the lower rolling resistance, first considerations to take into account when required to move large loads with a minimum of effort.
They can normally be used with a smooth bearing rolling on hardened steel cap (requiring in this case frequent lubrication), but the use of roller bearings or ball bearings is recommended when it is about moving large loads or great ease of movement is required.
These wheels support high static loads for long periods without suffering any deformation.
Precautions:
The smelting wheels spoil the soils, they are noisy, they rose because they are metallic and require greater entertainment.
Temperatures between -90 ° C to + 600 ° C can resist. (Except those who carry ball bearing -40ºC to + 140ºC, for superior temperatures, special bearings, consult) should be used. For temperatures above 200 ° C, the load capacity between 30% to 50% should be reduced.
The cast iron presents a certain fragility (it can break if it receives a strong blow).
General industry #Industry #manufacturing # production #alquiler
Construction and mining # Construction # Mining #ALQUILER
Código Referencia Diámetro Ancho banda de rodadura Ancho del cubo del núcleo Diámetro del cubo del núcleo Tipo de eje Carga máxima Peso
18-02 075 HFL4 75 34 45 12.2 Smooth axis 190 0.70
18-03 100 HFL4 100 38 45 12.2 Smooth axis 250 1.25
18-04 100 HFB4 100 38 45 12.0 Ball shaft 350 1.45
18-06 125 HFB4 125 38 45 20.0 Ball shaft 400 1.80
18-07 125 HFB5 125 50 60 20.0 Ball shaft 550 2.00
18-10 150 HFB6 150 50 60 20.0 Ball shaft 800 3.34
18-13 200 HFB6 200 50 60 20.0 Ball shaft 1,000 4,80
18-16 250 HFB6 250 50 60 25.0 Ball shaft 1,500 6.00

Values expressed in mm.