QPG6 HF-FD - Rotary support with brake, fastening by plate, cast iron wheel

Wheel with rotating bracket with double brake with HF wheel (cast iron monoblock) and plate clamp
Tracción Manual
Altas y bajas temperaturas
Para Riel
Stamped and electrowed steel supports.
Fastening of the supports by 4-hole plate.
Fork provided with screw and self-locking nut Quality 8.8: DIN-933 M12X90mm. Mounting bushes embedded on the bearings.
Finishes: Bright zinc.

PMP-FD model brackets
Simultaneous blocking of wheel and holder.
Available in all rotating rotary.

Propiedades de la rueda

Diámetro
Diámetro
150 a 250 mm
Carga máxima
Carga máxima
1.000 a 1.500 Kg
Dureza de la Banda
Dureza de la Banda
180 a 220 HB
Protección del suelo
Protección del suelo
1/5
Resistencia Rodadura
Resistencia Rodadura
1/5
Ruido
Ruido
5/5
Temperatura de trabajo
Temperatura de trabajo
-90 a 600 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Tamaño Pletina Tamaño Pletina 150x110 mm
Tornillo Sujeción Tornillo Sujeción M12
Distancia Agujeros Distancia Agujeros 121/105x80/59 mm
Espesor Horquilla Espesor Horquilla 6,0 mm
Eje Rueda Eje Rueda M12
Diámetro Diámetro 150 a 250 mm
Carga máxima soporte Carga máxima soporte 1.000 a 1.500 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 50 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 60 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 20 a 25 mm
Tipo de eje Tipo de eje Eje Bolas
Banda de rodadura Banda de rodadura Metálicas
Color banda de rodadura Color banda de rodadura Metálico
QPG6-HF-FD
Special:
They are obtained by iron casting with laminar graphite.
According to DIN 1691 (190-205 HB). Machining tread tread.
Applications:
The foundry is a good choice in cases of very severe working conditions or where the existence of cutting objects, chemical products or excessive temperatures would quickly destroy other types of wheels.
Properties:
They combine strength, long duration and economy.
In conjunction with steel wheels, they have the highest load capacity and the lower rolling resistance, first considerations to take into account when required to move large loads with a minimum of effort.
They can normally be used with a smooth bearing rolling on hardened steel cap (requiring in this case frequent lubrication), but the use of roller bearings or ball bearings is recommended when it is about moving large loads or great ease of movement is required.
These wheels support high static loads for long periods without suffering any deformation.
Precautions:
The smelting wheels spoil the soils, they are noisy, they rose because they are metallic and require greater entertainment.
Temperatures between -90 ° C to + 600 ° C can resist. (Except those who carry ball bearing -40ºC to + 140ºC, for superior temperatures, special bearings, consult) should be used. For temperatures above 200 ° C, the load capacity between 30% to 50% should be reduced.
The cast iron presents a certain fragility (it can break if it receives a strong blow).
General industry #Industry #manufacturing # production #alquiler
Construction and mining # Construction # Mining #ALQUILER
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
36-866-FD QPG6 150 HFB6-FD 150 50 130 200 Ball shaft 1,000 6.54
36-868-FD QPG6 200 HFB6-FD 200 50 163 250 Ball shaft 1,000 8.22
36-870-FD QPG6 250 HFB6-FD 250 50 197 300 Ball shaft 1,500 9,63

Values expressed in mm.