QPG7 PO - Rotating support, Plate clamp, Polyamide wheel

Wheel with rotating bracket with PO wheel (polyamide monoblock) and fastening to plate
Tracción Manual
Tracción Mecánica
Ambientes húmedos u oxidantes
Stamped and electrowed steel supports.
Fastening of the supports by 4-hole plate.
Fork provided with screw and self-locking nut Quality 8.8: DIN-933 M12X90mm. Mounting bushes embedded on the bearings.
Finishes: Bright zinc.

QPG model supports
Rotating head of forged and machining steel, made up of a DIN 711 presiding ball bearing in the plate and a DIN 720 tapered roller bearing embedded in the rotating head, filled with fully sealed fat and provided with ENGRASSER
Robust Pivot Central Forged One Piece with Pletin.
Blocacy of the rotating head by crew nut and pin that allows the adjustment of the game without having to chit the wheel.
Electrosolded stamped steel fork (interior + exterior) to the rotating head.

Propiedades de la rueda

Diámetro
Diámetro
125 a 200 mm
Carga máxima
Carga máxima
1.500 Kg
Dureza de la Banda
Dureza de la Banda
85º SHORE D
Protección del suelo
Protección del suelo
2 a 3/5
Resistencia Rodadura
Resistencia Rodadura
2/5
Ruido
Ruido
4/5
Temperatura de trabajo
Temperatura de trabajo
-30 a 80 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Tamaño Pletina Tamaño Pletina 138x110 mm
Tornillo Sujeción Tornillo Sujeción M10
Distancia Agujeros Distancia Agujeros 105x75/80 mm
Espesor Horquilla Espesor Horquilla 6,0 mm
Eje Rueda Eje Rueda M12
Diámetro Diámetro 125 a 200 mm
Carga máxima soporte Carga máxima soporte 1.500 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 55 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 60 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 25 a 35 mm
Tipo de eje Tipo de eje Eje Bolas
Banda de rodadura Banda de rodadura Banda de Nylon
Color banda de rodadura Color banda de rodadura Blanco
QPG7-PO
Special:
Extrected extrusion process - trained in molds (molten polyamide) - and controlled cooling, achieving a much more resistant material than injected polyamide, by avoiding internal tensions in the material that causes the process of Injection.Band tough tread (85 ° Shore D).
Applications:
Industries of any kind.
Properties:
Very high capacity of carga.Baja Traction resistance.
They are resistant to corrosion, atmospheric agents, aging and wear. They require a minimum of lubrication and maintenance.
Its chemical resistance is excellent and the material is not affected by water, salt, oils, fats, organic solvents, hydrocarbons, petroleum products, soaps, detergents, alkalis, milk, etc.
Precautions:
It is not advisable to its permanent contact with concentrated acids (+ 20%), oxidizing agents, iodine tincture, potassium permanganate, phenol, mercury, hydrogen peroxide and chlorine derivatives.
They support temperatures of -30 ° C to + 80 ° C, its best field of use is between + 5 ° C to + 40 ° C.
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Logistics and transport # logistics #transporte # Aeronautics # Army
Nautical # nautical #stilleros # maritime
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
37-40/6 QPG7 125 POB6 125 55 120 175 Ball shaft 1,500 5.75
37-50/6 QPG7 150 POB6 150 55 130 200 Ball shaft 1,500 7,20
37-60/6 QPG7 200 POB6 200 55 156 250 Ball shaft 1,500 9,40

Values expressed in mm.