TL - Monoblock of Termonyl® Color White.

Termonyl® monobloc wheel whites and diameters 100 to 200 mm
Tracción Manual
Ambientes húmedos u oxidantes
Altas y bajas temperaturas
They are obtained by injection of polyamide 6 with fiberglass: Termonyl®.
Specially designed to work at temperature (-30 ° C to + 150 ° C in continuous service).
These wheels can work in freezers and coolers at temperatures up to -40 ° C and guarantee high resistance against the thermal shock caused by the rapid increase or reduction of temperature, in fact, this material allows to support jumps from 190 ° C in less than 60 seconds, already Be cold to heat or backward.
Hard tread (85 ± 5 ° Shore D).

Propiedades de la rueda

Diámetro
Diámetro
100 a 200 mm
Carga máxima
Carga máxima
300 a 900 Kg
Dureza de la Banda
Dureza de la Banda
85 ±5º SHORE D
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
2/5
Ruido
Ruido
4/5
Temperatura de trabajo
Temperatura de trabajo
-30 a 150 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Diámetro Diámetro 100 a 200 mm
Carga máxima Carga máxima 300 a 900 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 40 a 50 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 45 a 60 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 12,2 a 20,2 mm
Tipo de eje Tipo de eje Eje Liso
Banda de rodadura Banda de rodadura Temperatura
Color banda de rodadura Color banda de rodadura Blanco
Special:
They are obtained by injection of polyamide 6 with fiberglass: Termonyl®.
Specially designed to work at temperature (-30 ° C to + 150 ° C in continuous service and + 170 ° C in intermittent service).
Hard tread (85 ± 5 ° Shore D).
Applications:
Especially indicated for applications in food industries and chemical industries, to use in conditions of moisture, heat, autoclaves and salt water.
Properties:
The same properties as nylon wheels, but with a wider range of temperatures.
Precautions:
The useful life of these wheels will depend on the temperature in which they work and the time of permanence in the oven.
General industry #Industry #manufacturing # production #alquiler
Health and Laboratories #Hospitage #Pho Pharmaceutical
Food and Hospitality # Food # Hospitality #inox
Código Referencia Diámetro Ancho banda de rodadura Ancho del cubo del núcleo Diámetro del cubo del núcleo Tipo de eje Carga máxima Peso
11-55 100 TLL4 100 40 45 12.2 Smooth axis 300 0,20
11-56 125 TLL4 125 40 45 15.2 Smooth axis 400 0.24
11-57 150 TLL5 150 40 58 20.2 Smooth axis 750 0.50
11-58 200 TLL5 200 50 60 20.2 Smooth axis 900 0.75

Values expressed in mm.