FTG4 TL - Rotating support, screw clamp, Termonyl wheel

Wheel with rotary support with TL wheel (Termonyl monoblock) and screw clamp
High strength rotary support with through hole, made of veneer of great thickness, stamped and galvanized, with a rotating double crown group of balls, assembled and riveted at the top.

FTG model supports
Double row of chrome steel balls protected by envelopes and grease retention gasket in the two rows.

Propiedades de la rueda

Diámetro
Diámetro
100 a 125 mm
Carga máxima
Carga máxima
200 a 250 Kg
Dureza de la Banda
Dureza de la Banda
85 ±5º SHORE A
Protección del suelo
Protección del suelo
3/5
Resistencia Rodadura
Resistencia Rodadura
2/5
Ruido
Ruido
4/5
Temperatura de trabajo
Temperatura de trabajo
-30 a 150 °C
Velocidad Máxima
Velocidad Máxima
4 Km/h
Diámetro Cabeza Diámetro Cabeza 73 mm
Tornillo Sujeción Tornillo Sujeción M12
Espesor Horquilla Espesor Horquilla 3,5 mm
Eje Rueda Eje Rueda M8
Diámetro Diámetro 100 a 125 mm
Carga máxima soporte Carga máxima soporte 200 a 250 Kg
Ancho Banda de Rodadura Ancho Banda de Rodadura 40 mm
Ancho del Cubo del Núcleo Ancho del Cubo del Núcleo 45 mm
Diámetro del Cubo del Núcleo Diámetro del Cubo del Núcleo 12,2 a 15,2 mm
Tipo de eje Tipo de eje Eje Liso
Banda de rodadura Banda de rodadura Temperatura
Color banda de rodadura Color banda de rodadura Blanco
FTG4-TL
Special:
They are obtained by injection of polyamide 6 with fiberglass: Termonyl®.
Specially designed to work at temperature (-30 ° C to + 150 ° C in continuous service and + 170 ° C in intermittent service).
Hard tread (85 ± 5 ° Shore D).
Applications:
Especially indicated for applications in food industries and chemical industries, to use in conditions of moisture, heat, autoclaves and salt water.
Properties:
The same properties as nylon wheels, but with a wider range of temperatures.
Precautions:
The useful life of these wheels will depend on the temperature in which they work and the time of permanence in the oven.
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
34-626 FTG4 100 TLL4 100 40 92 130 Smooth axis 200 0.80
34-648 FTG4 125 TLL4 125 40 113,5 151,5 Smooth axis 250 1,04

Values expressed in mm.