MIPG4 NS-FD - Rotary stainless steel brake, fastening, Nylon wheel - Superlast

Wheel with rotating stainless support with double brake with wheel NS (nylon core and SuperLAST band) and fastening to plate
Tracción Manual
Silenciosas
Protección del suelo
No manchan el suelo
AISI 304 stainless steel supports to Nickel-Chromium 18/8.
Fastening of the supports by 4-hole plate.
Fork provided with a stainless self-locking screw A2: DIN-933 M8X60 mm in> 80 to 125 mm and M12x80 mm in> 150 to 200 mm.
Stainless cap. AISI 304:> 12x8.2x46 in> 80 to 125 mm and> 20x12,2x60 in> 150 to 200 mm.
Finishes: Bright polishing.

Model Modg-FD supports
Simultaneous Blocker of Wheel and Stand Turn:
Available in all rotating rotary: Add FD to the reference or the corresponding rotary numeric code.

Propiedades de la rueda

Diámetro
Diameter
100 a 200 mm
Carga máxima
Maximum load
150 a 300 Kg
Dureza de la banda
Hardness of the band
80 ±2º SHORE A
Protección del suelo
Floor protection
4/5
Resistencia rodadura
Rolling resistance
3/5
Ruido
Noise
2/5
Temperatura de trabajo
Working temperature
-20 a 80 °C
Velocidad máxima
Maximum speed
6 Km/h
Tamaño Pletina Plastine 105x85 a 129x108 mm
Tornillo Sujeción Screw M8, M12
Distancia Agujeros Drift 80x60 a 105x80 mm
Espesor horquilla Thickness fork 2,0 mm
Eje rueda Wheel M8, M10
Diámetro Diameter 100 a 200 mm
Carga máxima soporte Maximum support 150 a 300 Kg
Ancho banda de rodadura Wide tread band 33 a 50 mm
Ancho del cubo del núcleo Nucleus hub width 45 a 59 mm
Diámetro del cubo del núcleo Diameter of core cube 12 a 20,2 mm
Tipo de eje Shaft type Eje Liso, Eje Rodillos Inox
Banda de rodadura Tread Banda de Poliuretano
Color banda de rodadura Color tread Azul
MIPG4-NS-FD
Particularities: VSE obtained by injection of a polyamide core on a soft polyurethane band (80 ± 2 ° Shore A).
They are modern wheels that combine the properties of nylon and polyurethane (urethane rubber).
Applications:
Indicated for the pharmaceutical and food industry: slaughterhouses, meat, etc.
Applications in humd conditions.
In cases required: a more elastic and silent displacement than offered by polyurethane wheels.
Properties:
They bring together the nylon qualities in the core and improve them in the bands of rodadura.Poseen Good looking and finished, they are light weight, silent and soft, clean, are not oxidized and a minimum entertainment is not oxidized and required.
The polyurethane (urethane rubber) is a material with an exceptional resistance to wear, good resistance to deformation, is more elastic than the nylon, makes less noise and offers greater protection of soils.
Resists atmospheric agents, hydrocarbons, fats, oils, milk, etc.
Precautions:
The "injected" polyurethane is of characteristics lower than the "vulcanized" polyurethane.
They resist contact with acids, solvents and alcohol.
They support temperatures of -30 ° C to + 80 ° C (the category 5 wheels can reach 120 ° C during short periods), its best field of use is between + 5 ° C to + 40 ° C.
General industry #Industry #manufacturing # production #alquiler
Automotive # Automotive #TALLER # Mechanics
Health and Laboratories #Hospitage #Pho Pharmaceutical
Food and Hospitality # Food # Hospitality #inox
Leisure and shows #Ocio # shows #deportes #eventos
Código Referencia Diámetro Ancho banda de rodadura Radio de Giro del Rotante Altura total Tipo de eje Carga máxima soporte Peso
34-102/38-FD MIPG4 100 NSL4-FD 100 33 92 128 Smooth axis 150 0.82
34-102/40-FD MIPG4 100 NSX4-FD 100 33 92 128 Stainless roller shaft 150 0.84
34-102/60-FD MIPG4 125 NSL4-FD 125 35 104 155 Smooth axis 200 0.90
34-102/62-FD MIPG4 125 NSX4-FD 125 35 104 155 Stainless roller shaft 200 0.92
34-102/744-FD MIPG4 150 NSL4-FD 150 40 127 192 Smooth axis 300 2.08
34-102/746-FD MIPG4 150 NSX4-FD 150 40 127 192 Stainless roller shaft 300 1,78
34-102/92-FD MIPG4 200 NSL4-FD 200 50 148 240 Smooth axis 300 2.39
34-102/94-FD MIPG4 200 NSX4-FD 200 50 148 240 Stainless roller shaft 300 2.45

Values expressed in mm.