PMC - Handy-to-chain hoists

Manual chain hoists with a maximum load of up to 10000 kg
Crankcase in steel sheet covered with oven paint.
Hooks built in ductile steel alloy, with a special treatment, guaranteeing that the hook is not broken but is gradually deformed under an overload. Load chain Grade 80 coated with epoxy paint for better protection against corrosion.
Thanks to the chain separator and the guide rollers, the chain is always perfectly aligned. The hoists are tested above their nominal load
Optional:
They can be supplied with additional elevation meters
Carga máxima Carga máxima 10.000 Kg
Peso Peso 9,40 a 70,00 Kg
Elevación máxima Elevación máxima 3,0 a 6,0 m
Numero ramales Numero ramales 1 a 4
Cadena maniobra Cadena maniobra 3 m
Esfuerzo Elevación 200 a 435 Nw
Código Referencia Lift Elevación máxima Numero ramales Cadena maniobra Peso Carga máxima
78-130 PMC-0,5 / 3MT 200 NW 3.0 1 3 9,40 500
78-130/06 PMC-0,5 / 6MT 200 NW 6.0 1 3 11.02 500
78-132 PMC-1,0 / 3MT 320 NW 3.0 1 3 10.50 1,000
78-132/06 PMC-1,0 / 6MT 320 NW 6.0 1 3 12.90 1,000
78-134 PMC-1,5 / 3MT 360 NW 3.0 1 3 15.50 1,500
78-134/06 PMC-1,5 / 6MT 360 NW 6.0 1 3 18.80 1,500
78-136 PMC-2,0 / 3MT 365 NW 3.0 1 3 18.50 2,000
78-136/06 PMC-2,0 / 6MT 365 NW 6.0 1 3 22.70 2,000
78-138 PMC-3,0 / 3MT 385 NW 3.0 2 3 21,20 3,000
78-138/06 PMC-3,0 / 6MT 385 NW 6.0 2 3 24.50 3,000
78-140 PMC-5,0 / 3MT 435 NW 3.0 2 3 41.80 5,000
78-140/06 PMC-5,0 / 6MT 435 NW 6.0 2 3 48,40 5,000
78-141/02 PMC-10,0 / 3MT 435 NW 3.0 4 3 70.00 10,000

Values expressed in mm.