- Out-of-Stock
UPG8 200 POB8 - Soporte giratorio, Sujeción por pletina, Rueda Poliamida
Wheel with rotating support with PO wheel (polyamide monoblock) of Ø 200 mm and fastening to plate
Código:
38-410
Referencia:
UPG8 200 POB8
Stamped and electrowed steel supports.
Fastening of the supports by 4-hole plate.
Mounting bushes embedded on the bearings.
Finishes: Bright zinc.
Model supports UPG
Rotating head of forged and machining steel, made up of a DIN 711 presiding ball bearing in the plate and a DIN 720 tapered roller bearing embedded in the rotating head, filled with fully sealed fat and provided with ENGRASSER
Robust Pivot Central Forged One Piece with Pletin.
Blocacy of the rotating head by crew nut and pin that allows the adjustment of the game without having to chit the wheel.
Electrosolded stamped steel fork (interior + exterior) to the rotating head.
Fastening of the supports by 4-hole plate.
Mounting bushes embedded on the bearings.
Finishes: Bright zinc.
Model supports UPG
Rotating head of forged and machining steel, made up of a DIN 711 presiding ball bearing in the plate and a DIN 720 tapered roller bearing embedded in the rotating head, filled with fully sealed fat and provided with ENGRASSER
Robust Pivot Central Forged One Piece with Pletin.
Blocacy of the rotating head by crew nut and pin that allows the adjustment of the game without having to chit the wheel.
Electrosolded stamped steel fork (interior + exterior) to the rotating head.
Propiedades de la rueda
Maximum load
4,500 Kg
Diameter
200 mm
Hardness of the band
85º SHORE D
Floor protection
Rolling resistance
Noise
Working temperature
-30 to 80 ° C
Maximum speed
4 Km / h
|
|
Plastine | 200x160 mm |
|
|
Screw | M16 |
|
|
Drift | 160x120 mm |
|
|
Thickness fork | 10 mm |
|
|
Wheel | M25 |
|
|
Diameter | 200 mm |
|
|
Maximum support | 4,500 Kg |
|
|
Wide tread band | 80 mm |
|
|
Nucleus hub width | 85 mm |
|
|
Diameter of core cube | 45.0 mm |
|
|
Shaft type | Ball shaft |
|
|
Tread | Nylon band |
|
|
Color tread | White |
PARTICULARIDADES:
Se obtienen por un proceso de extrusión -vertido sin presión en moldes (de poliamida fundida)- y enfriamiento controlado, consiguiendo un material mucho más resistente que la poliamida inyectada, al evitar las tensiones internas en el material que provoca el proceso de inyección.Banda de rodadura dura (85°SHORE D).
APLICACIONES:
Industriales de cualquier tipo.
PROPIEDADES:
Ruedas de muy alta capacidad de carga.Baja resistencia a la tracción.
Son resistentes a la corrosión, a los agentes atmosféricos, al envejecimiento y al desgaste. Requieren un mínimo de lubrificación y mantenimiento.
Su resistencia química es excelente y el material no se ve afectado por el agua, la sal, aceites, grasas, disolventes orgánicos, hidrocarburos, productos petrolíferos, jabones, detergentes, álcalis, leche, etc.
PRECAUCIONES:
No se aconseja su contacto permanente con ácidos concentrados (+20%), agentes oxidantes, tintura de yodo, permanganato potásico, fenol, mercurio, peróxido de hidrógeno y derivados del cloro.
Soportan temperaturas de -30°C a +80°C, su mejor campo de utilización se sitúa entre +5°C a +40°C.
Se obtienen por un proceso de extrusión -vertido sin presión en moldes (de poliamida fundida)- y enfriamiento controlado, consiguiendo un material mucho más resistente que la poliamida inyectada, al evitar las tensiones internas en el material que provoca el proceso de inyección.Banda de rodadura dura (85°SHORE D).
APLICACIONES:
Industriales de cualquier tipo.
PROPIEDADES:
Ruedas de muy alta capacidad de carga.Baja resistencia a la tracción.
Son resistentes a la corrosión, a los agentes atmosféricos, al envejecimiento y al desgaste. Requieren un mínimo de lubrificación y mantenimiento.
Su resistencia química es excelente y el material no se ve afectado por el agua, la sal, aceites, grasas, disolventes orgánicos, hidrocarburos, productos petrolíferos, jabones, detergentes, álcalis, leche, etc.
PRECAUCIONES:
No se aconseja su contacto permanente con ácidos concentrados (+20%), agentes oxidantes, tintura de yodo, permanganato potásico, fenol, mercurio, peróxido de hidrógeno y derivados del cloro.
Soportan temperaturas de -30°C a +80°C, su mejor campo de utilización se sitúa entre +5°C a +40°C.
Industria General #industria #manufactura #producción #alquiler
Automoción #automoción #taller #mecánica
Logística y Transporte #logística #transporte #aeronáutica #ejército
Náutica #náutica #astilleros #marítimo
Automoción #automoción #taller #mecánica
Logística y Transporte #logística #transporte #aeronáutica #ejército
Náutica #náutica #astilleros #marítimo